Jak použít repa-set zipů na svém stanu

Quick answer

You can fix a tent zipper that won't close or stay shut by replacing the slider with a Zipper Repair Kit. The kit includes the right size sliders and a sewing kit for the job.

How to replace a tent zipper slider

1. Identify the slider type and size: Look at the back of the broken slider for a number (e.g., #5 or #8) or compare it visually to the sliders in the kit. The kit includes several sizes; pick the one that matches the zipper tape width and tooth shape. A common mistake is assuming all sliders are the same; using the wrong size will cause the zipper to jam or separate again.
2. Remove the old slider: Use a small flat-head screwdriver or pliers to gently pry the slider off the zipper track. Work from the top stop end, sliding the slider off the open end of the tape. If the stop is sewn in, you may need to cut a few threads to free it. Be careful not to tear the zipper tape; a damaged tape cannot be repaired with a slider replacement.
3. Install the new slider: Thread the zipper tape through the new slider at a slight angle, starting with the bottom stop end. Push the slider onto the tape until it clicks into place. Test the zipper by pulling it up and down; it should engage both sides evenly. If the slider feels loose or won't close fully, it may be the wrong size; try the next size in the kit.
4. Secure the top stop (if removed): If you had to cut the top stop to remove the old slider, use the sewing kit included to stitch a new stop with heavy thread. This prevents the new slider from sliding off the top of the zipper. Skipping this step means the slider could come off the next time you open the tent.

Product fact

• Zipper Repair Kit: The Zipper Repair Kit contains an assortment of zipper sliders, a sewing kit, and instructions for emergency in-field or at-home repairs. You don't need to guess which slider size fits your tent; the assortment covers the most common sizes, so you can find the right one without ordering multiple parts.