Start with the opening size, not the color
The Vesica 1L comes in two thread options: 28mm and 42mm. That choice decides which filters and caps you can pair with the bottle, so make it before you think about packing. The 28mm version uses the same universal thread as the Vecto and attaches to filters with a 28mm thread, such as the Sawyer Squeeze, Mini, or Micro, the LifeStraw Flex, and the HydroBlu Versa Flow. The 42mm version works as a dirty water bottle for filters like the BeFree by Katadyn.
If you already carry a 28mm filter, the 28mm Vesica keeps your kit consistent. If your filter uses a 42mm connection, choose that version instead. The color options are Purple and Green in both sizes, so color is a preference, not a compatibility decision.
What the Vesica 1L gives you on trail
- Vesica 1L Collapsible Bottle: Capacity: 1 liters / 32 oz; Weight: 60 g / 2.1 oz A full liter of water in a bottle that weighs 60 g empty keeps your hydration setup light without changing how much you carry.

Vesica 1L Collapsible Bottle - Vesica 1L Collapsible Bottle: Packed size: 4x2.9x2.9 in / 10x5x5 cm; Trail size: 10x2.9x2.9 in / 25.5x5x5 cm When empty, the Vesica packs down to roughly the size of a small stuff sack, so it disappears into a side pocket or lid until you need it.
- Vesica 1L Collapsible Bottle: Robust and durable utilizing a thick 0.4mm TPU The thicker body is what lets the Vesica stand when full and hold its shape for drinking, rather than flopping like a thin bladder.
- Vesica 1L Collapsible Bottle: Operational temperatures: 20°F (-6°C) to 120°F (49°C) Knowing the temperature range helps you decide when to keep the bottle in your pack versus an outside pocket.
How to pack and carry the Vesica 1L
- Carry it full in a side pocket: The stiff neck and bottom let the Vesica stand when full, so it sits upright in a side pocket for easy drinking on the move. The top string near the cap makes it easy to pull out of a side pocket.
- Stash it empty when you reach water: When the bottle is empty, collapse it and stow it in your pack or lid. The packed size of 4x2.9x2.9 in / 10x5x5 cm means it takes up very little room until your next fill.
- Use the tethered cap and slider: The tethered cap keeps the lid attached to the bottle, so you are less likely to drop it while filling or drinking. The slider helps you open and close the bottle with one hand.
- Keep the wide opening accessible: The wide opening makes the Vesica easy to fill and simple to clean and dry. Plan your packing so the opening is not buried under other gear when you stop at a stream.
Using the Vesica as a dirty water bottle
If you filter into a container for easy drinking, the Vesica can serve as your dirty water bottle. Fill it at the source, attach your filter to the matching thread, and squeeze or gravity-feed into a clean bottle or cup. The 28mm version pairs with the Sawyer Squeeze, Mini, or Micro, the LifeStraw Flex, and the HydroBlu Versa Flow. The 42mm version pairs with filters like the BeFree by Katadyn.
CNOC also describes using the Vesica with the Vecto to create a fast, light filtering system. If you already carry a Vecto, adding a Vesica gives you a dedicated dirty-water container that collapses when empty. Keep the dirty bottle separate from your clean drinking bottle so you do not mix the two.
Care habits that keep the TPU body working
- Rinse and dry through the wide opening: The wide opening is the main care advantage: it lets you rinse the inside and leave the bottle open to dry. Do not store the Vesica sealed and wet if you can avoid it.
- Respect the temperature range: The supplied operational range is 20°F (-6°C) to 120°F (49°C). Avoid leaving the bottle in a hot car or a freezing pack pocket outside that range.
- Keep the cap and slider clean: The tethered cap and slider are the parts you touch most. Wipe them down when you clean the bottle, and check that the slider moves freely before a trip.
- Store it collapsed and dry: When the bottle is empty and dry, collapse it and store it in your pack or gear bin. The packed size is small enough that it will not take up much space between trips.
What the supplied information does not cover
The supplied records do not include a step-by-step cleaning procedure, a leak-test method, or a recommended replacement interval. They also do not state whether the bottle is dishwasher safe or how to treat it if it develops a taste. For those questions, check the manufacturer's documentation rather than guessing. What the records do confirm is the thread compatibility, the 1L capacity, the 60 g weight, the packed and trail dimensions, the 0.4mm TPU body, the temperature range, and the wide opening for filling and drying.


